BSMRF - V8050 ADHESIUM HEAVY DUTY
- MSDS: BSMRF
- Manufacturer: MURALO CO INC
- Product Name: V8050 ADHESIUM HEAVY DUTY
- National Stock Number: 6850-00F031127
Product Identification
Product ID:V8050 ADHESIUM HEAVY DUTY
MSDS Date:03/04/1992
FSC:6850
NIIN:00F031127
MSDS Number: BSMRF
Responsible Party
BAYONNE, NJ 07002
US
Emergency Phone: 201-437-0770
Info Phone: 201-437-0770
Cage: MURAL
Contractor
Telephone: 201-437-0770
Cage: MURAL
Ingredients
STARCH, PHOSPHATE *93-3*
CAS: 11120-02-8
BORIC ACID, MONOSODIUM SALT (SODIUM METABORATE)
CAS: 7775-19-1
RTECS: ED4640000
Fraction By Weight: 3%
DEXTRIN
CAS: 9004-53-9
RTECS: HH9450000
CLAY (KAOLIN), ALUMINUM SILICATE
CAS: 1332-58-7
RTECS: GF1670500
ACGIH TLV: 10 MG/CUM TOTAL DUST
WATER
CAS: 7732-18-5
RTECS: ZC0110000
10.4
RTECS: 9999999WG
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE, THROAT & LUNGS
IRRITATION. SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHE & NAUSEA.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/PLENTY OF
WATER. SKIN: WASH W/SOAP & WATER. INGESTION: GIVE 2 GLASSES OF
WATER TO DRINK. NEVER GIVE ANYTHING BY MOUTH IF UNCONSCIOUS. OBTAIN
MEDICAL ATTE NTION IN ALL CASES.
Fire Fighting
Flash Point:NON-FLAMMABLE
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES. ABSORB
W/ABSORBENT. SWEEP OR SCOOP UP, VENTILATE EXPOSED AREAS.
Handling
Handling and Storage Precautions:USE W/ADEQUATE VENILATION.
Other Precautions:AVOID BREATHING VAPORS & SKIN CONTACT.
Exposure Controls
Respiratory Protection:USE AIR SUPPLIED RESCUE EQUIPMENT IN ENCLOSED
AREAS.
Ventilation:ADEQUATE
Protective Gloves:REQUIRED
Eye Protection:GLASSES
Other Protective Equipment:FULL LENGTH CLOTHING
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH TEMPERATURES OR FLAME
Hazardous Decomposition Products:ACRYLIC MONOMERS, CO
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.